6 Select “Slide Show”, then press the ENTER key.

7 Select “Start”, then press the ENTER key.

To execute the slide show

When you create presentation material using Projector Station for Presentation, if the slide show setting is set to “Auto”, the slide show is executed according to the settings made by the Projector Station for Presentation. When you want to end the slide

show, press the or ENTER key. If the slide show setting is set to “Manual,” press the following keys for the slide show.

,: to display the next slide < : to display the previous slide : to end the slide show

To return to Memory Stick Home before executing the slide show

Select “Close” to return to Memory Stick Home before executing the slide show in Step 6 of “Sliding Material for a Presentation — Presentation Viewer.”

Executing the Slide Show Promptly

As the settings are memorized even if you change the input after the setting of steps 1 to 5 of “Sliding Material for a Presentation

—Presentation Viewer,” press the key on the Remote Commander just as you start the presentation. The input is changed to

“Memory Stick”. Press the key again and the slide show starts promptly. To end

the slide show, press the or ENTER key when the slide show setting is “Auto”, or

press the key when the slide show setting is “Manual.”

Switching the File Display Mode

You can display one picture file only (Normal mode) or thumbnails of picture files (Thumbnail mode).

1 Select “Index Display” in Memory Stick Home, then press the ENTER key.

2 Select the setting, then press the ENTER key.

Normal: to display a picture file

Thumbnail: to display thumbnails of the picture files contained in the selected contents

Repeating the Slide Show

1 Select “Slide Show” in Memory Stick Home, then press the ENTER key.

2 Select “Repeat”, then press the ENTER key.

On: to execute the slide show repeatedly

Off: to execute the slide show one time only

Starting a Slide Show from the Selected Index Picture

You can run a slide show by selecting a thumbnail in the normal or thumbnail display mode.

1 Press the M, m, < or , key to select the picture file from which you want to start the slide show, and press the ENTER key.

2 Press the M or m key to select “Slide Show” in the picture setting menu, and press the ENTER key.

Setting the Autorun Function

When you store the presentation file for which the Autorun function is set in the “Memory Stick” and insert it in the Memory Stick slot on the projector, the input channel is automatically switched to “Memory Stick” and the slide show starts.

1 Select the title of the file you want to use for your presentation in Memory

Slide the Viewing

Sliding Material for a Presentation — Presentation Viewer

13