Sony VPL-CX76 Projecting a Selected File When the Power is Turned on, — Startup, Off, Custom, Original

Projecting a Selected File When the Power is Turned on

— Startup

When the power is turned on, the selected picture file is projected for about 30 seconds.

When you want to use the registered picture file as the startup file, you must register a picture file as the startup file in the index screen (see page 22).

When a picture file whose resolution is larger than XGA (1024×768) is registered, a startup file may not be displayed correctly.

1 Select “Option” in Memory Stick Home, then press the ENTER key.

2 Select “Setting”, then press the , or ENTER key.

3 Select “Startup”, then press the ENTER key.

4 Select the item, then press the ENTER key.

Original : to select the original picture memorized in the projector. The original picture cannot be changed.

Custom : to select the picture file registered in the index screen which is saved in “Memory Stick”

Off : when you do not want to set the startup

Notes

•When you want to use the registered file with the custom setting, insert the “Memory Stick” where the registered file is saved in the projector, then turn on the power.

•You can register one startup file per “Memory Stick”.

26 Projecting a Selected File When the Power is Turned on — Startup