Sony VPL-CX76 To execute the slide show with the picture on the full screen, To execute the slide show, Executing the Slide Show Promptly

8 Select each item, then press the ENTER key.

9 Set each item, then press the ENTER key.

10Select “Start”, then press the ENTER key.

To execute the slide show

When “Advan. Slds.” in the slide show setting is set to “Auto”, the slides change automatically. When a movie file is selected, the movie plays back automatically, and after playback the next slide is displayed automatically. When you want to end the

slide show, press the or ENTER key. When it is set to “Manual”, press the following keys for the slide show.

,: to display the next slide < : to display the previous slide : to end the slide show

When “Advan. Slds.” is set to “Manual”, the movie is not played back and the first picture is displayed for a movie file. By pressing the , key the next slide is displayed. To play back the movie, see “Playing Back a Movie File” on page 17.

To return to Memory Stick Home before executing the slide show

Select “Close” to return to Memory Stick Home before executing the slide show in Step 10 of “Sliding a Picture File — Picture Viewer” (see page 14)

2 Press the m or M key to select “Slide Show” in the picture setting menu, and press the ENTER key.

Displaying a Picture File on the Full Screen

1 Select a picture file in the thumbnail display, then press the ENTER key.

2 Select “Full Screen”, then press the ENTER key.

The selected picture file is enlarged on the full screen.

To execute the slide show with the picture on the full screen

Press the following keys.

,: to display slides forward (The slide

show ends at the last picture file.)

<: to display slides backward (The slide show ends at the first picture file.)

: to return to Memory Stick Home

Starting a Slide Show from the Selected Index Picture

You can run a slide show by selecting a thumbnail in the normal or thumbnail display mode.

1 Press the M, m, < or , key to select the picture file from which you want to start the slide show, and press the ENTER key.

Executing the Slide Show Promptly

As the settings are memorized even if you change the input after the setting of steps 1 to 9 of “Sliding a Picture File — Picture

Viewer”, press the key on the Remote Commander just as you start the presentation. The input is changed to

“Memory Stick”. Press the key again and the slide show starts promptly. To end

the slide show, press the or ENTER key when “Advan. Slds.” is set to “Auto”, or

16 Sliding a Picture File — Picture Viewer