Setting items | Functions | Initial setting |
|
|
|
Direct Power On | Set to “On” if you are using a circuit breaker to turn the | Off |
| power on/off the entire system. You can turn off the power |
|
| just by unplugging the power cord without pressing the ?/1 |
|
| key. |
|
|
|
|
High Altitude | Set to “On” when the projector is used at an altitude of | Off |
Mode | 1,500 m or higher. |
|
|
|
|
Security Lock | Turns on the projector’s security lock function. | Off |
| When set to “On,” turns on the security lock function, |
|
| which locks the projector once a password has been set. |
|
| For details, see “Security Lock” on page 21. |
|
|
|
|
Notes
•The auto V Keystone adjustment may not correct the trapezoidal distortion perfectly, depending on the room temperature or the screen angle.
•Even when projecting using “Side Shot”, the four sides of a picture may sometimes not be parallel to the respective sides of a screen frame.
34 The INSTALL SETTING Menu