to lower the | to raise the |
projector | projector |
TILT adjustment key
Powered tilt adjuster
Notes
•When you adjust the powered tilt adjuster with the TILT key, the V keystone adjustment is performed at the same time. If you do not want to perform the automatic keystone adjustment, set the V Keystone menu to “Manual.” (See page 33.)
If you set the “V Keystone” adjustment to “Auto,” the “V Keystone” correction is automatically adjusted. However, it may not be perfectly adjusted depending on the room temperature or the screen angle. In this case, adjust it manually. Press the TILT/KEYSTONE key on the Remote Commander until “V Keystone” appears on the screen, and adjust the value with the M/m/</, keys. The corrected value is effective until the power is turned off.
•Be careful not to let the projector down on your fingers.
•Do not push hard on the top of the projector with the powered tilt adjuster extended.
It may cause a malfunction.
7 Adjust the horizontal trapezoidal
distortion (
) of the picture using the “Side Shot.”
To adjust using the Remote
Commander
Press the TILT/KEYSTONE key on the Remote Commander to display the Side Shot menu (horizontal trapezoidal distortion/H keystone correction) and adjust the tilt using the M/m/</, keys.
To adjust using the control panel
Press the SIDE SHOT +/ – key on the control panel to adjust the distortion.
For details, see “Side Shot” on page 33 and ““Side Shot” and “V Keystone” Adjustments” on page 55.
8 Adjust the size of the picture and the focus.
To adjust using the Remote
Commander
Select the item to be adjusted by pressing the LENS key, then adjust with the M/m/</, key. Each time you press the key, the menu toggles between Lens Focus and Lens Zoom in order.
To adjust using the control panel
Press the ZOOM +/– keys on the projector to adjust the size of the picture and press the FOCUS +/– keys to adjust the focus.
18 Projecting