Control Panel
15
2
3
4
6
a?/1 (On/Standby) key
Turns on the projector when the projector is in standby mode. The ON/ STANDBY indicator around the ?/1 key flashes in green until the projector is ready to operate.
bON/STANDBY indicator (located around the ?/1 key)
Lights up or flashes under the following conditions:
–Lights in red when the AC power cord is plugged into a wall outlet. Once the projector is in standby mode, you can turn it on with the ?/1 key.
–Lights in green when the power is turned on, and when it is ready to operate.
–Flashes in green from the projector is turned on until the projector is ready to operate. Also, flashes in green while the cooling fan is running after the power is turned off with the ?/1 key. The fan runs for about 90 seconds after the power is turned off.
For detail on the ?/1 indicator, see page 18.
cMENU key
Displays the
dPUSH ENTER/v/V/b/B (Arrow) keys
Used to enter the settings of items in the menu system, select a menu, or make various adjustments.
eINPUT key
fStatus indicators
•POWER SAVING
Lights when the projector is in power saving mode.
•TEMP (Temperature)/FAN
Lights or flashes under the following conditions:
–Lights when the temperature inside the projector becomes unusually high.
–Flashes when the fan is broken.
•LAMP/COVER
Lights or flashes under the following conditions:
–Lights when the lamp has reached the end of its life or reaches a high temperature.
–Flashes when the lamp cover or air filter cover is not secured firmly.
For details, see page 39.
10 Location and Function of Controls