The INSTALL SETTING Menu
The INSTALL SETTING menu is used for changing the settings of the projector.
INSTALL SETTING | |
V Keystone: | 0 |
Image Flip: | Off |
Background: | Blue |
Lamp Mode: | Standard |
High Altitude Mode: Off | |
Security Lock: | Off |
Setting items | Functions | Initial setting |
|
|
|
V Keystone | Corrects the trapezoidal distortion caused by the projection | 0 |
| angle using the v/V/b/B keys on the Remote Commander. |
|
| When the bottom of the trapezoid is longer than the top |
|
| : Sets a lower value. |
|
| When the top of the trapezoid is longer than the bottom |
|
| : Sets a higher value. |
|
|
|
|
Image Flip | Flips the image on the screen horizontally and/or vertically. | Off |
| • Off: The image does not flip. |
|
| • HV: Flips the image horizontally and vertically. |
|
| • H: Flips the image horizontally. |
|
| • V: Flips the image vertically. |
|
|
|
|
Background | Selects the background color of the screen when no signal | Blue |
| is input to the projector. Select “Black” or “Blue.” |
|
| Normally, set to “Blue.” |
|
| This setting becomes effective when the menu is cleared |
|
| after setting of the background color. |
|
|
|
|
Lamp Mode | Sets the lamp brightness used during the projection. | Standard |
| • High: Illuminates the projected image brightly. |
|
| • Standard: Reduces fan noise and power consumption. |
|
| The brightness of the projected image will be lower |
|
| compared with the “High” setting. |
|
|
|
|
High Altitude | Set to “On” when the projector is used at an altitude of | Off |
Mode | 1,500 m or higher. |
|
|
|
|
Security Lock | Turns on the projector’s security lock function. | Off |
| When set to “On,” turns on the security lock function, |
|
| which locks the projector once a password has been set. |
|
| For details, see “Security Lock” on page 20. |
|
|
|
|
Menu a Using Settings and Adjustments
The INSTALL SETTING Menu 31