cKEYSTONE (Trapezoidal distortion correction) key
Adjusts the vertical trapezoidal distortion of the image. Pressing this key, the adjustment menu are displayed. Use the arrow keys (v/V/b/B) for adjustment.
dRESET key
Resets the value of an item to its factory preset value or returns the enlarged image to its original size. This key functions when the menu or a setting item is displayed on the screen.
ePIC MUTING key
Cuts off the picture. Press again to restore the picture.
fFREEZE key
Freezes the projected picture. To cancel the frozen picture, press the key again.
gD ZOOM (Digital Zoom) +/– key
Enlarges the image at a desired location on the screen.
hInfrared transmitter
i?/1 (On/Standby) key
jv/V/b/B (Arrow) keys
kENTER key
lMENU key
mVOLUME +/– keys
Before using the Remote
Commander
Pull out the clear film from the lithium battery holder.
To replace a battery
1 Release the lock of the lithium battery holder by picking it, and pull out the holder from the Remote Commander.
2 Install the lithium battery.
Face the + side up.
3 Put the lithium battery holder back into the Remote Commander.
Notes on the lithium battery
•A button type lithium battery (CR2025) is used in the Remote Commander. Do not use batteries other than CR2025.
•Keep the lithium battery out of the reach of children.
•Should the battery be swallowed, immediately consult a doctor.
Notes on Remote Commander operation
•Make sure that nothing obstructs the infrared beam between the Remote Commander and the remote control detector on the projector. Direct the Remote Commander toward the remote control detector.
•The operation range is limited. The shorter the distance between the Remote Commander and the remote control detector is, the wider the angle within which the commander can control the projector becomes.
12 Location and Function of Controls