40 Replacing the Lamp
5Insert the new lamp all the way in until
it is securely in place (a). Tighten the
two screws (b).
• Be care ful not to touch the glass surface
of the lamp.
• The power will not turn on if the lamp is
not secured properly.
• Do not allow any liquid or ot her objects
into the slot to avoid electrical shock or
fire.
6Close the lamp cover and tighten the
screw.
Be sure to attach the lamp cover securely
as it was. If not, the projector cannot be
turned on.
7Turn the projector back over.
8Connect the power cord.
The ?/1 key lights in red.
9Press the ?/1 key to turn the projector
on.
10
Press the MENU key, and then select
the SET SETTING menu.
11
Select “Lamp Timer Reset,” and then
press the ENTER key.
12
Select “Execute” with the V key, and
then press the ENTER key.
The Lamp Timer is initialized to 0, and
“Change the Lamp and clean the Filter?”
is displayed in the menu screen.
Refer to page41 for “Cleaning the Air
Filter.”
13
Select “Yes” with the v key.
“Lamp Timer Reset Complete!” is
displayed in the menu screen.
Disposal of the used lamp
For the customers in the USA
Lamp in this product contains mercury.
Disposal of these materials may be regulated
due to environmental considerations. For
disposal or recycling information, please
contact your local authorities or the
Electronic Industries Alliance
(www.eiae.org).
Notes
Note
SET SETTING Input-A
Smart APA: On
Auto Input Search:
Off
Input-A Signal Sel.:
Auto
Color System: Auto
Power Saving: Off
Panel Key Lock: Off
CC Display: Off
Lamp Timer Reset
Change the Lamp and clean the Filter?
Yes: No: