47
Specifications
Others
AUDIO INPUT
Stereo minijack, 500 mVrms,
input impedance 47 Kilohms or
more
OUTPUT MONITOR OUT: HD D-sub15-
pin (female)
R, G, B: Gain Unity: 75 ohms
HD, VD: 4 Vp-p (open), 1 Vp-p
(75 ohms)
AUDIO OUT (variable out):
Stereo minijack
1 Vrms (When the volume is
maximum and an input signal is
500 mVrms), output impedance
5 kilohms or less
REMOTE RS-232C: D-sub 9 pin
General
Dimensions Approx. 313.4 × 114.1× 269 mm
(12 11/32 × 4 1/2 ×
10 19/32 inches) (w/h/d)
(without projecting parts)
Mass Approx. 3.1 kg (6 lb 13 oz)
Power requirements
AC 100 to 240 V, 2.7 to 1.1 A,
50/60 Hz
Power consumption
Max.270 W
During standby (Standard): 3 W
During standby (Low): 1 W
Heat dissipation
921 BTU
Operating temperature
0 °C to 40 °C (32 °F to 104 °F)
Operating humidity
35% to 85% (no condensation)
Storage temperature
–20 °C to +60 °C (–4 °F to +140 °F)
Storage humidity
10% to 90%
Supplied accessories
Remote Commander (1)
CR2025 Lithium battery (1)
(installed in the Remote
Commander)
HD D-sub 15 pin cable (1.8 m) (1)
(1-832-428-11/Sony)
AC power cord (1)
Lens cap (1)
Operating Instructions (CD-ROM)
(1)
Quick Reference Manual (1)
Security Label (1)
Design and specifications are subject to change
without notice.
Always verify that the unit is operating properly
before use. SONY WILL NOT BE LIABLE FOR
DAMAGES OF ANY KIND INCLUDING, BUT
NOT LIMITED TO, COMPENSATION OR
REIMBURSEMENT ON ACCOUNT OF THE
LOSS OF PRESENT OR PROSPECTIVE
PROFITS DUE TO FAILURE OF THIS UNIT,
EITHER DURING THE WARRANTY PERIOD
OR AFTER EXPIRATION OF THE
WARRANTY, OR FOR ANY OTHER REASON
WHATSOEVER.
Optional accessories
Projector Lamp
LMP-E210 (for replacement)

Some of the items may not be available in

some areas. For details, please consult your

nearest Sony dealer.

Note