Sony VPL-FE40L The Installation Menu, HV:, Off:, High:, Rear:, Front:, Standard:, Front & Rear:

The Installation Menu

The Installation menu is used for changing the settings of the projector.

Lamp Mode	Standard
ID Mode	All
Illumination
Direct Power On

Setting items	Functions		Initial setting
V Keystone	Corrects the vertical trapezoidal distortion of the picture.		0
	When the bottom of the trapezoid is longer than the top
	(	): Sets a lower value (– direction)
	When the top of the trapezoid is longer than the bottom
	(	): Sets a higher value (+ direction).
Image Flip	Flips the picture on the screen horizontally and/or		Off
	vertically.
	Use this item for installation for the backside projection or
	ceiling installation.
	• HV: Flips the picture horizontally and vertically.
	• H: Flips the picture horizontally.
	• V: Flips the picture vertically.
	• Off: The picture does not flip.
Lamp Mode	Sets the lamp brightness used during the projection.		Standard
	• High: Illuminates the projected image brightly.
	• Standard: Reduces fan noise and power consumption.
		The brightness of the projected image will be lower
		compared with the “High” setting.
Lens Control	Avoids any operation of the lens such as “Focus,” “Zoom,”		On
	and “Shift,” by mistake.
		When set to “On,” you can adjust the projection lens
		using “Focus,” “Zoom,” and “Shift.” After you make this
		adjustment, it is recommended that you set this item to
		“Off” to avoid any operation of the lens. When set to
		“Off,” the FOCUS, ZOOM and SHIFT keys do not work.
IR Receiver	Selects the remote control detectors (IR Receiver) on the		Front & Rear
	front and rear of the projector.
	• Front & Rear: Activates both the front and rear
		detectors.
	• Front: Activates the front detector only.
	• Rear: Activates the rear detector only.

36 The Installation Menu