
Specifications
Optical characteristics
Projection system
| 
 | 3 LCD panels, 1 lens, 3 primary | 
| 
 | color shutter system | 
| LCD panel | |
| 
 | panel, 4,410,000 pixels (1400 × | 
| 
 | 1050 × 3) | 
| 
 | |
| 
 | 2,359,296 pixels (1024 ⋅ 768 × | 
| 
 | 3) | 
| Lens | 1.3 times zoom lens (powered) | 
| 
 | f 30.6 to 39.7 mm/F1.66 to 2.18 | 
| 
 | * The lens is not supplied with the | 
| 
 | |
| Lamp | 275 W Ultra high pressure lamp | 
| Projected picture size | |
| 
 | 40 to  | 
| 
 | diagonally) (When the VPLL- | 
| 
 | 1008 is used: 60 to  | 
| Light output | 4000 ANSI lumen | 
| 
 | (When the Lamp Mode is set to | 
| 
 | “High.”) | 
Throwing distance for 
When an SXGA+ 
(4.9 to 6.2 feet)
(7.4 to 9.5 feet)
(9.9 to 12.7 feet)
(12.5 to 15.9 feet)
(15.0 to 19.1 feet)
(18.8 to 23.9 feet)
(25.2 to 32.0 feet)
(37.9 to 48.0 feet)
(50.6 to 64.1 feet)
(63.3 to 80.2 feet)
(76.0 to 96.3 feet)
There may be a slight difference between the actual value and the design value shown above.
Electrical characteristics
Color system NTSC3.58/PAL/SECAM/ 
(NTSC4.43 is the color system used when playing back a video recorded in NTSC on a NTSC4.43 system VCR.)
Resolution 
1,400 × 1,050 dots (RGB input) 
lines (Video input)
1,024 ⋅ 768 dots (RGB input)
Acceptable computer signals1) fH: 19 to 92 kHz
fV: 48 to 92 Hz
(Maximum input signal resolution: UXGA 1600 ⋅ 1200
fV: 60 Hz)
1)Set the resolution and the frequency of the signal of the connected computer within the range of acceptable preset signals of the projector.
Applicable video signals
15 k RGB 50/60 Hz, Progressive
component 50/60 Hz, DTV (480/60i, 575/50i, 480/60p, 575/50p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/60p, 1080/50p), Composite video, Y/ C video
Speaker Stereo speaker system, 40 ⋅ 70 mm (1 5/8 ⋅ 2 7/8 inches)
Speaker output
1.8 W × 2
Input/Output
VIDEO IN VIDEO: phono type Composite video: 1 
SVIDEO: Y/C mini DIN 
Y (luminance): 1 
C (chrominance): burst 0.286 
(75 ohms terminated) AUDIO: phono type × 2
rated input 500 mVrms, input
Others
Specifications 47