Sony manual Installation Advantages, Good TCO and ECO-friendly Design, VPL-FH30 VPL-FW41

Installation Advantages

Lens Shift Function

The VPL-FH30 has a Lens Shift function which is controlled from the projector control panel or the supplied Remote Commander® unit. Using this function, the position of the projected image can be moved vertically by up to 60% and horizontally from -32% through to +32%. Images can be easily adjusted to the desired settings during installation.

Convenient, Simple Projector Replacement

The standard 1.6x zoom lens enables installation flexibility when replacing an existing projector with the VPL-FH30 – there’s no need to change ceiling mount positions. For applications where more than a standard lens is needed, the VPL-FH30 is compatible with the optional VPLL-Z1024 and VPLL-Z1032 accessory lenses designed for Sony’s current VPL-F40 Series.

"Blend-in" Design

The VPL-FH30 showcases a newly designed low-profile chassis, so the projector appears to blend into the ceiling or wall on which it is mounted. The connector panel is located on the front of the unit so its cables cannot be seen by the audience.

Good TCO and ECO-friendly Design

Long-lasting Lamp

By incorporating a newly developed high-performance lamp and advanced lamp-control technology, the VPL-FH30 offers a recommended lamp replacement time of approximately 4000 hours.*1

Conventional 1	VPL-FH30	Conventional 2
Shorter throw ratio		Longer throw ratio

Broad throw ratio simplifies projector replacement

VPL-FH30

VPL-FW41

Conventional

model

4000 hours

2500 hours

Recommended lamp replacement time*2

Centered Lens Design

The centered lens provides symmetry for a balanced installation, and makes setup very simple.

Balanced and symmetrical installation

*1 in standard mode. Expected maintenance time, not guaranteed. Lamp performance will vary based on operating environment and use.

*2 The values are approximate

Low Power Consumption

The VPL-FH30 offers remarkably low power consumption, allowing users to make significant savings on their electricity expenses.

ECO MODE Key

With a single push of the ECO MODE key on either the projector or the supplied Remote Commander® unit, users can select an energy-saving setting from the ECO Mode

ECO MODE key

3