Ceiling Installation (C and D on page 63)This section gives examples for installing the projector on the ceiling.

When installing the projector on the ceiling, use the optional PSS-630 Projector Suspension Support. For ceiling installation, consult with qualified Sony personnel only.

Note on the dust cover

When installing the projector on the ceiling, be sure to attach the supplied dust cover to the projector.

Fix the dust cover to the ceiling bracket mounting holes of the projector together with the projector mounting bracket of the PSS-630.

The mounting screws are not supplied. Use the screws supplied with the PSS-630 or commercially available M6 screws with embedment length of 10 to 11 mm (13/32 to 7/16 inches).

Dust cover (supplied)

Attaching the PSS-630 Projector Suspension Support (E, Fand G on page 67)

The installation measurements are shown when you install the projector with the VPLL-Z4019 Standard Zoom Lens on the ceiling using the PSS-630 Projection Suspension Support.

For more details on the ceiling installation, refer to the Installation manual for Dealers of the PSS-630.

Adjusting the Projector Height

The distance between the ceiling and the mounting surface of the Projector Suspension Support (value “c” in Fig. F) is adjustable in the following range. The optional PSS-630P Projector Suspension Support Joint Pole is available for the height adjustment.

Without using PSS-630P poles: 350/380/410/440/470/500 mm (13 7/8 / 15 / 16 1/4 / 17 3/8 / 18 5/8 /19 3/4 inches)Using one PSS-630P pole: 630/660/690/720/750/780

mm(24 7/8 / 26 / 27 1/4 / 28 3/8 / 29 5/8 / 30 3/4 inches) Using two PSS-630P poles: 910/940/970/1,000/1,030/

1,060 mm (35 7/8 / 37 1/8 / 38 1/4 / 39 3/8 / 40 5/8 / 41 3/4 inches)

Using three PSS-630P poles: 1,190/1,220/1,250/1,280/ 1,310/1,340 mm (47 / 48 1/8 / 49 1/4 / 50 1/2 / 51 5/8 / 52 7/8 inches)

Floor Installation for Twin Stacking (H on page 68)

This section gives examples for installing two projectors on the desk using twin-stacking.

80to 600-inch screens are available for twin stack installation.

Note

For safety and maintenance purposes, install the projectors away from the wall. Leave a minimum space of 50 cm (19 3/4 inches) from both sides and the rear.

Note on stacking1 Install the projector following the “a” value in stacking example H.

2 Use the zoom to align the pictures from the first and second projectors so that they fill the screen.

Projector Dimensions (I to N on pages 72 to 75)

This section gives the projector outside dimensions with the VPLL-Z4019 Standard Zoom Lens.

For the dimension drawings, see pages 72 to 75.Front ITop JSide KBottom LRear MCeiling bracket dimensions N

Installation Diagram

19