Sony VPL-HS1 About a “Memory, Using a “Memory Stick”, Stick”, projector, On MagicGate, “Memory Stick”s, On “Memory Stick”s, Types of “Memory Stick”s, Using, format:

Using a “Memory Stick”

This section describes how to view the still images that are recorded by a digital camera and stored in a “Memory Stick.” You can make a slide show using the images, display an index screen of the images, etc.

About a “Memory

Stick”

On “Memory Stick”s

“Memory Stick” is a new compact, portable and versatile IC recording medium with a data capacity that exceeds a floppy disk. “Memory Stick” is specially designed for exchanging and sharing digital data among “Memory Stick” compatible products. Because it is removable, “Memory Stick” can also be used for external data storage.

Types of “Memory Stick”s

Using	There are two types of “Memory Stick”s: MagicGate
	“Memory Stick”s that are equipped with the
	MagicGate copyright protection technology and
“Memorya Stick”	general “Memory Stick”s. You can use both types of
	“Memory Stick” with your projector. However,
	because your projector does not support the
	MagicGate standards, data recorded in the “Memory
	Stick” is not subject to MagicGate copyright
	protection.
	On MagicGate
	MagicGate is copyright protection technology that
	uses encryption technology.
	Format that can be displayed with this
	projector
	Image data recorded with a digital camera and
	recorded on a “Memory Stick” in the following
	format:
	Images (DCF-compatible) compressed in the JPEG
	(Joint Photographic Experts Group) format
	(extension: .jpg)

Before using a “Memory Stick”

Terminal

Write-protect tab

Labeling position

•You cannot rotate or erase still images when the write-protect tab on the “Memory Stick” is set to LOCK.

•We recommend backing up important data.•Image data may be damaged in the following cases:

–If you remove the “Memory Stick,” turn the power off, or detach the battery for replacement when the access lamp is flashing.

–If you use a “Memory Stick” near static electricity or magnetic fields.

Notes

•Prevent metallic objects or your finger from coming into contact with the metal parts of the connecting section.

•Do not attach any other material than the supplied label onto the label space.

•Attach the label to the prescribed labeling position. Make sure the label is attached to the labeling position properly.

•Do not bend, drop or apply strong shock to a “Memory Stick.”

•Do not disassemble or modify a “Memory Stick.”

•Do not let the “Memory Stick” get wet.

•Do not use or keep a “Memory Stick” in locations that are:

–Extremely hot such as in a car parked in the sun or under the scorching sun.

–Under direct sunlight.

–Very humid or subject to corrosive gases.

•When you carry or store a “Memory Stick,” put it in its case.

About formatting “Memory Stick”s

When “Memory Stick”s are shipped from the factory, they are already formatted to a special standard format. When you format “Memory Stick”s, we recommend formatting them on this unit.

Caution when formatting	“Memory Stick”s
on a personal computer

Pay attention to the following points when formatting “Memory Stick”s on the personal computer, for example, that you are using.

Operation of “Memory Stick”s formatted on the personal computer is not guaranteed on this unit. To use a “Memory Stick” that has been formatted on the personal computer, the “Memory Stick” must be reformatted on this unit. Note that in this case all data stored on the “Memory Stick” will be lost.

GB 22 About a “Memory Stick”