Sony VPL-HS1 Menu Items, HUE, ON:, Menu, Item, CTRL, OFF:, OFF:, COLOR, SHARP, INPUT, SHIFT, 16:9:, BRIGHT, VOLUME, button, SIZE H, ASPECT, PICTURE, cotrast, picture

Menu Items

Adjustable items are limited according to the input signals. Items that cannot be adjusted are not displayed in the menu. (1 page 42)

Menu		Item	Description
	PICTURE	CONTRAST	The higher the setting, the greater the contrast. The lower the setting, the lower the
CTRL			cotrast.
		BRIGHT	The higher the setting, the brighter the picture. The lower the setting, the darker the
		(brightness)	picture.
		COLOR	The higher the setting, the greater the intensity. The lower the setting, the lower the
			intensity.
		HUE	The higher the setting, the more greenish the picture becomes. The lower the setting,
			the more purplish the picture becomes.
		SHARP	The higher the setting, the sharper the picture. The lower the setting, the softer the
		(sharpness)	picture.
		RGB ENHANCER	Adjusts the picture sharpness when computer signals are input.
		D. (Dynamic)	ON: Emphasizes the black color.
		PICTURE	OFF: Reproduces the dark portions of the picture accurately, in accordance with the
			source signal.
		GAMMA MODE	GRAPHICS: Reproduces the photos in natural tones.
			TEXT: Contrasts black and white. Suitable for images that contain lots of text.
		COLOR TEMP	HIGH: Gives the white colors a blue tint.
			MIDDLE: Gives the white colors a neutral tint.
			LOW: Gives the white colors a red tint.
		COLOR SYS	Select the color system of the input signal.
		(System)	AUTO: NTSC3.58, PAL, SECAM and NTSC4..43 (switched automatically).
			Normally, set to this position.
			PAL-M/N:PAL-M/PAL-N and NTSC3.58 (switched automatically).
			When the PAL-M, PAL-N or NTSC3.58 signal is input with COLOR SYS set to
			AUTO, set to this position if the picture is distorted or colorless.
		VOLUME	Adjusts the volume. It can be adjusted for each of the inputs selected with the INPUT
			button.
	INPUT	DOT PHASE	When a signal from a computer is input, adjusts the picture for clearer picture after the
SETTING			picture is adjusted by pressing the APA button.
		SIZE H	When a signal from a computer is input, adjusts the horizontal size of the picture. The
			higher the setting, the wider the picture. The lower the setting, the narrower the
			picture.
		SHIFT	As the setting for H (horizontal) increases, the picture moves to the right, and as the
			setting decreases, the picture moves to the left. Use < or , to adjust the horizontal
			position.
			As the setting for V (vertical) increases, the picture moves up, and as the setting
			decreases, the picture moves down. Use M or m to adjust the vertical position.
		SCAN CONV	ON: Displays a computer signal according to the screen size. The picture will be
		(Scan converter)	slightly softer.
			OFF: Displays a computer signal as it is input. The picture will be clear but the picture
			size will be smaller.
			Note
			When SVGA or XGA signal is input, this item will not be displayed.
		ASPECT	4:3: Select when the 4:3 aspect ratio picture is input.
			16:9: Select when the 16:9 aspect ratio picture (squeezed) is input from equipment
			such as a DVD player.
			* Squeezed: An original picture is recorded horizontally compressed, as shown in the illustration.
			When you set ASPECT to 16:9, you can view the picture with16:9 aspect ratio.
			Original picture	Displayed
			(16:9 aspect ratio	picture with
			picture is	ASPECT set to
			horizontally	16:9
			compressed to be a
			4:3 picture.)

Menus the Using

Menu Configurations 19 GB