Sony VPL-HS1 23 GB, Inserting a “Memory Stick”, a Using, Stick”, “Memory a Using, Notes, Access Lamp, To remove the “Memory Stick”

Access Lamp

If the access lamp is turned on or is flashing, data is being read from or written to the “Memory Stick.” Do not shake the projector or subject it to shock. Do not turn off the power of the projector or remove the “Memory Stick.” This may damage the data.

Notes

•To prevent data loss, make backup of data frequently. In no event will Sony be liable for any loss of data.

•Unauthorized recording may be contrary to the provisions of copyright law.

•The “Memory Stick” application software may be modified or changed by Sony without prior notice.

.....................................................................................

•“Memory Stick” and are trademarks of Sony Corporation.

•“MagicGate Memory Stick” and are trademarks of Sony Corporation.

Preparing for Viewing the Still Picture Stored in a “Memory Stick”

Inserting a “Memory Stick”

Insert the “Memory Stick” into the “Memory Stick” slot on the front of the projector.

“Memory Stick”

Insert the “Memory Stick” in the direction of the arrow until it clicks.

To remove the “Memory Stick”

When the access lamp is turned off, press the “Memory Stick” and remove your hand. As the lock is released, remove the “Memory Stick.”

Stick” “Memory a Using

Access lamp

Preparing for Viewing the Still Picture Stored in a “Memory Stick” 23 GB