Menus the Using

4 Make the setting or adjustment on an item.When changing the adjustment level

To increase the value, press M or ,. To decrease the value, press m or <. Press ENTER to restore the original screen.

When changing the setting

Press M or m to change the setting.

Press < or ENTER to restore the original screen.

SET SETTING

VIDEO 1

STATUS:

ON

INPUT-A:

COMPONENT

LANGUAGE:

ENGLISH

POWER SAVING:

ON

ENTER

or

To clear the menu

Press MENU.

To reset items that have been adjusted

Select the item you want to reset, then press RESET. “Complete!” appears on the screen and the setting is reset to its factory preset value.

Items that can be reset are:

•CONTRAST, BRIGHT, COLOR, HUE, SHARP and RGB ENHANCER in the PICTURE CTRL menu

•DOT PHASE, SIZE H and SHIFT in the INPUT SETTING menu

•DIGIT KEYSTONE in the INSTALL SETTING menu

Menu Configurations

The projector is equipped with four menu pages. The items that can be adjusted in each menu are described on pages 19 and 20.

PICTURE CTRL menu

The PICTURE CTRL menu is used for adjusting the picture. You can also adjust the volume with this menu.

INPUT SETTING menu

The INPUT SETTING menu is used to adjust the input signal. You can adjust the size and position, etc. of the picture.

SET SETTING menu

The SET SETTING menu is used for changing the settings of the projector.

INSTALL SETTING menu

The INSTALL SETTING menu is used for correcting distortion. You can change the display position, intensity of the background picture, etc., of the menu screen.

GB 18 Menu Configurations