Notes

•Do not put your hands into the lamp replacement spot, or not fall any liquid or object into it to avoid electrical shock or fire.

•Be sure to use the LMP-H120 Projector Lamp for replacement. If you use lamps other than LMP-H120, the projector may cause a malfunction.

•Be sure to turn off the projector and unplug the power cord before replacing the lamp.

Disposal of used projector lamp

As the materials used in this lamp are similar to those of a fluorescent lamp, you should dispose of a used projector lamp in the same way as a fluorescent lamp.

Replacing the Air Filter

The air filter should be replaced periodically. When “Please replace the filter.” appears on the screen, replace the air filter immediately.

Notes

•Replacing the air filter is very important to maintain the high efficiency of the projector and to prevent a malfunction. When the replacement message appears on the screen, replace the air filter without delay.

•When removing the air filter from the projector, be careful that no dust or object gets into the inside of the projector.

1Place a protective sheet (cloth) beneath the projector. Turn the projector over so you can see its underside.

Note

Be sure that the projector is stable after turning it over.

2Slide the release lever on the adjuster outward and turn the adjuster clockwise to remove the adjuster.

2

3

1

Release lever

3Push the knob on the filter cover to remove the filter cover.

Knob

4Remove the filter holder.

5Remove the air filter from the filter holder by holding the tab on the air filter.

Air filter

Filter holder

Tab

6Insert the new air filter into the filter holder with the white surface up, then replace it in the projector.

7Replace the filter cover.8Attach the adjuster.

Others

Replacing the Air Filter 39 GB