Installation Menu
The Installation menu is used for changing the installation settings.
Picture | V Keystone : |
| 0 |
|
Image Flip : |
| O f f |
| |
|
|
| ||
Signal | Background : |
| Blue |
|
Illumination : |
| On |
| |
|
|
| ||
Function | High Altitude Mode : | O f f |
| |
| Network Setting |
|
| |
Installation |
|
|
|
|
Setup |
|
|
|
|
Information |
|
|
|
|
| Sel: | Set: | Back: | Exit: |
Item | Description |
|
|
|
| ||
V Keystone | Corrects the vertical trapezoidal distortion of the picture. | ||
| Sets a lower value (– direction) when the bottom of the trapezoid is | ||
| longer than the top ( | ). Sets a higher value (+ direction) when | |
| the top of the trapezoid is longer than the bottom ( | ). | |
| Note |
|
|
| Depending on the picture position adjusted with the lens shift | ||
| feature, the aspect ratio of the picture may change from the original | ||
| or picture distortion may occur with V Keystone adjustment. | ||
|
| ||
Image Flip | Flips the picture on the screen horizontally and/or vertically. | ||
| Off: The picture does not flip. |
| |
| HV: Flips the picture horizontally and vertically. |
| |
| H: Flips the picture horizontally. |
| |
| V: Flips the picture vertically. |
| |
|
| ||
Background | Selects the background color of the screen when no signal is input. | ||
| You can select “Black” or “Blue.” |
| |
|
| ||
Illumination | Turns on the illumination on the top panel of the projector when set | ||
| to On. It turns off when set to Off. |
| |
|
| ||
High Altitude Mode | Off: Use this setting when using the projector at normal altitudes. | ||
| On: Use this setting when using the projector at an altitude of 1,500 | ||
| m or higher. |
|
|
| Note |
|
|
| When set to On, the fan inside the projector runs faster. |
| |
|
| ||
Network Setting (VPL- | Displays settings in the network configuration of this projector. | ||
HS51A only) | Notes |
|
|
|
|
| |
| • You cannot change the network settings with this projector. For | ||
| information on networking, consult with qualified Sony personnel. | ||
| • Be sure to set “Standby Mode” in the Function menu to “Standard” | ||
|
| ||
|
|
|
|
Menus the Using
Installation Menu 41