43
Using the Menus
Picture Menu

The Picture menu is used for adjusting the picture.

These items may not be available, depending on the type of input signal. For details, see “Input
Signals and Adjustable/Setting Items” (1 page75).
Note
Picture Mode You can select the picture viewing mode that best suits the type of
picture or the environment.
Dynamic: Project bright images with sharp, vivid picture quality.
Standard: Ideal for projecting TV programs, concerts, and other vide o
images.
Cinema: Picture quality suited for watching movies.
User1, User 2, User 3: You can adjust the quality of the picture to suit
your taste and then store the settings. Once the settings are stored, you
can view the picture with the adjusted picture quality by pressing the
PICTURE MODE button on the remote control.
To store the settings
1Select User1, User 2, or User3.
2Adjust the items you want in the menus.
Tip
You can also store the settings if the picture quality is adjusted in
“Dynamic”, “Standard” or “Cinema”. To reset everything to the factory
settings, select “Reset” from the menu.
The factory default settings are as follows.
User 1: Same as “Dynamic” setting.
User 2: Same as “Standard” setting.
User 3: Same as “Cinema” setting.
Reset Resets all currently selected picture mode settings to their default values.
(1 page 42)