61
Others
On-screen displayRemote control
The picture is too dark. cAdjust the “Contrast” or “Brightness” of the Picture menu
properly. (1 page 44)
The picture is not clear. cAdjust the focus. (1 page 20)
cCondensation has accumulated on the lens. Leave the projector
for about 2 hours with the power on.
The picture flickers. cFor pictures from a computer, activate “APA” and adjust the
current input signal.
cAdjust “Phase” for “AdjustSignal” in the Screen menu
properly. (1 page 49)
The color of characters or
the picture is not
appropriate.
cSelect the desired color registration in “Panel Alignment” of
Installation menu (1 page 55).
Symptom Cause and Remedy
Symptom Cause and Remedy
On-screen display does not
appear.
cSet “Status” in the Setup menu to “On.” (1 page 50)
cCheck if the ON/STANDBY indicator should light in green.
The model name does not
disappear from the screen.
cThe display mode of the projector may be set at the time of
purchase. Consult with your local dealer or qualified Sony
personnel.
Input terminals do not
appear.
cSet “Auto Input Search” in the Function menu to “Off”. (1
page 53)
Symptom Cause and Remedy
The remote control does
not work.
cBatteries could be weak. Replace them with new batteries.
(1 page 10)
cInsert the batteries with the correct polarities. (1 page 10)
cIf there is a fluorescent lamp near the remote control detector, the
projector may work improperly or inadvertently.
cConfirm the position of the remote control detector on the
projector. (1 page 7)