Maintenance

Notes

•The lamp becomes a high temperature after turnig off the projector with the I /ukey. If you touch the lamp, you may scald your finger. When you replace the lamp, wait for at least an hour for the lamp to cool.

•Be sure to use the LMP-600 Projector Lamp for replacement. If you use lamps other than LMP-600, the projector may cause a malfunction.

•Be sure to turn off the projector and unplug the power cord before replacing the lamp.

•Do not place the old lamp near children or near the objects which catch fire easily.

•Do not get wet the lamp or fall any liquid or object inside the lamp. The lamp may broken.

•Do not put your hands into the lamp replacement spot, or not fall any liquid or object into it to avoid electrical shock or fire.

Cleaning the Air Filter

The air filter should be cleaned every 300 hours. When it becomes difficult to remove the dust from the filter, replace the filter with a new one.

To clean the air filter, follow the steps below:

1 Turn off the power and unplug the power cord.

2 Pull up the carrying handle.

3 Press and hold the PUSH button and remove the air filter cover on the right side of the projector.

4 Pull up the spring.

5 Remove the air filter.

6 Remove the dust from the filter with a vacuum cleaner.

7 Attach the air filter and replace the cover.

34 (EN)