21
The SET SETTING Menu
Adjustments and Settings Using a Menu
The SET SETTING Menu

The SET SETTING menu is used for setting various functions of the projector.

Items Item descriptions
Smart APA On/Off: When set to “On,” executes APA automatically when a signal
is input.*1 *2
Auto Input Search On/Off: When set to “On,” the projector detects input s ignals in the
following order: Input-A/Input-B/Video/S Video. It indicates the input
channel when the power is turned on or the INPUT key is pressed.
Input-A Signal Sel. Auto/Computer/Component/Video GBR: When set to “Auto,”
selects the type of video signal input automatically when “Inp ut-A” is
selected with the INPUT key.*3
Color System Auto/NTSC 3.58/PAL/PAL-60/SECAM/NTSC4.43/PAL-M/PAL-N:
When set to “Auto,” selects the color system automatically when “S
Video” or “Video” is selected with the INPUT key.*3
Power Saving Mode Lamp Cutoff: The lamp turns off automatically and power
consumption is reduced if no signal is input for 10 minutes. The lamp
lights again when a signal is input or any key is pressed. In Lamp
Cutoff, the ?/1 key lights in orange (page30).
Standby: The power will be turned off automatically and the projector
goes to Standby mode if no signal is input for 10 minutes.
Off: The Power Saving Mode is canceled.
Panel Key Lock On/Off: When set to “On,” locks all the control panel keys of the
projector. However, you can operate the following when set to “On”:
• Press and hold the ?/1 key for approximately 10 seconds during
Standby mode.
c The projector turns on.
• Press and hold the ?/1 key for approximately 10 seconds during
power on.
cThe projector goes to Standby mode.
• Press and hold the MENU key for approximately 10 seconds during
power on.
c“Panel Key Lock” is set to “Off” and enables operation of all keys
on the projector.
CC Display CC1/CC2/CC3/CC4/Text1/Text2/Text3/Text4: Select the closed
caption service (Captions or Text).
Off: Closed caption does not appear.
Network Setting*4
IP Address Setup Auto (DHCP ): The IP address is assigned automatically from the
DHCP server such as a router.
Manual: To specify the IP Address manually.
IP Address/Subnet
Mask/Default
Gateway/DNS
Server/Apply
When “Manual” is selected for “IP Address Setup,” select the item
with the B or b key and input the value with V or v key. When all
items are entered, select “Apply” then press the ENTER key. The
entered settings will be registered.
Lamp Timer Reset When replacing the lamp, resets the lamp timer (page34).