27
Using Network Features
Network
BNetwork
Using Network Features
Connection to the network allows you to operate the following features:
• Checking the current status of the projector via a Web browser.
• Remotely controlling the projector via a Web browser.
• Receiving the e-mail report for the projector.
• Making the network settings for the projector.
• Supports network monitor ing, control protocol (Advertisement, PJ Talk, PJ Link, AMX
DDDP [Dynamic Device Discovery Protocol]).
• The menu disp lays used for the explanation below may be different depending on the mo del you
are using.
• Supported Web browsers are Internet Ex plorer 6/7/8.
• The menu displays only English.
• If the browser of your computer is set to [Use a proxy server] when you h ave access to the projector
from your computer, click the check mark to set accessing without using a proxy s erver.
1Connect the LAN cable.
2Set the network settings for the
projector using “Network Setting” on
the SET SETTING menu (page 21).
3Start a web browser on the computer,
enter the following in the address field,
then press the Enter key on your
computer.
http://xxx.xxx.xxx.xxx
(xxx.xxx.xxx.xxx: IP address for the
projector)
You can confirm the IP address of the
projector under “Network Setting” on
the SET SETTING menu.
The following window appears in the
Web browser:
Once you make the network settings, you
can open the Control window only by
performing step 3 of this procedure.
How to operate the Control window
Switching the page
Click one of the Page Switching buttons to
display the desired setting page.
Notes

Displaying the Control Window of the Projector with a Web

Browser

LAN cable
(straight type)
(not supplied)
Hub, router, etc
LAN Connector
Page Switching buttons