Improper useDo not do any of the following while using the projector.Blocking the ventilation holes.

Ventilation holes (intake)

Ventilation holes (exhaust)

Tip

For details on the location of the ventilation holes (intake or exhaust), see “Location of Controls” on pages 8 to 9.

Tilting front/rear and left/right

15° or more

15° or more

15° or more

15° or more

15° or more

Avoid using the projector tilted at an angle of more than 15 degrees.

Do not install the projector anywhere other than on a level surface or on the ceiling. Failing to set this mode when using the projector at high altitudes may result in uneven color uniformity and reducing the reliability of the effects of the lamp.

When installing the unit at altitudes

When using the projector at an altitude of 1,500 m or higher, set “Cooling Setting” in the Setup menu to “High” (1 page 46). Failing to set this mode when using the projector at high altitudes could have adverse effects, such as reducing the reliability of certain components.

Preparations and Connections

13