Installation Menu

The Installation menu is used for changing the installation settings.

V Keystone

Corrects the vertical trapezoidal distortion of the picture.

 

 

When the bottom of the trapezoid is longer than the top (

):

 

 

Sets a lower value (– direction)

 

 

When the top of the trapezoid is longer than the bottom (

):

 

 

Sets a higher value (+ direction).

 

 

 

 

 

 

 

 

Note

 

 

Depending on the picture position adjusted with the lens shift

 

 

feature, the aspect ratio of the picture may change from the original

 

or picture distortion may occur with V Keystone adjustment.

 

 

 

 

 

 

Image Flip

Flips the picture on the screen horizontally and/or vertically.

 

 

Off: The picture does not flip.

 

 

HV: Flips the picture horizontally and vertically.

 

 

H: Flips the picture horizontally.

 

 

V: Flips the picture vertically.

 

 

Use this item for installation for the backside projection or ceiling

 

 

installation.

 

 

 

 

 

 

Lens Control

Avoids any operation of the lens such as “Lens Focus,” “Lens

 

 

Zoom,” and “Lens Shift,” by mistake.

 

 

When set to “On,” you can adjust the projection lens using “Lens

 

 

Focus,” “Lens Zoom,” and “Lens Shift.” After you make this

 

 

adjustment, it is recommended that you set this item to “Off” to

 

 

avoid any operation of the lens.

 

 

 

 

 

 

IR Receiver

Selects the remote control detectors (IR Receiver) on the front

 

 

and rear of the projector.

 

 

Front & Rear: Activates both the front and rear detectors.

 

 

Front: Activates the front detector only.

 

 

Rear: Activates the rear detector only.

 

 

 

 

 

 

Menus the Using

49