WHG-SLK2i/WHG-SLK1i.GB.4-187-068-11(1)
25GB
Getting Started
Continued

FM/AM antennas

Find a location and an orientation that
provide good reception, and then set up
the antennas.
Keep the antennas away from the speaker
cords, the power cord and the USB cable
to avoid picking up noise.

Power

Connect the power cord to a wall outlet.
If the supplied adaptor on the plug does
not t your wall outlet, detach it from the
plug (only for models equipped with an
adaptor).

Speakers

Connect the speaker cords to the
SPEAKERS jacks.

Cancelling the automatic

demonstration

When you rst turn on the system,
the demonstration screen appears
automatically.
To turn o the automatic demonstration
screen, follow the procedure below.
1
Select “Settings” from the home
menu, then press ENTER.
2
Select “Demonstration mode,”
then press ENTER.
e setting screen appears.
3
Press / repeatedly to select
“OFF,” then press ENTER.

Saving power in standby mode

is system enters standby mode
when you turn o the system using
the / button, minimizing the
power consumption automatically
(power saving mode). However, if
“Demonstration mode” has been enabled,
the system cannot enter power saving
mode. Be sure to turn o demonstration
mode to save power in standby mode.
Note
Be aware that the system cannot enter power
saving mode if both “Demonstration mode”
and “Auto Standby” (page 97) settings are
turned on.