WHG-SLK2i/WHG-SLK1i.GB.4-187-068-11(1)
45GB
Disc

To select a transition eect for image

les in the slideshow

(JPEG image les only)
1
Press DISPLAY during slideshow.
e Control Menu appears.
If “EFFECT” is not displayed on the
Control Menu, press DISPLAY
repeatedly until “EFFECT” appears.
2
Press or repeatedly to select
(EFFECT), then press ENTER.
e options for “EFFECT” appear.
3
Press or repeatedly to select the
desired setting.
e default setting is underlined.
MODE 1: e image sweeps in
from top to bottom of the screen.
MODE 2: e image sweeps in
from le to right of the screen.
MODE 3: e image stretches out
from the center of the screen.
MODE 4: e image randomly
cycles through the eects.
MODE 5: e next image slides
over the current image.
OFF: turns o this function.
4
Press ENTER.
e selected setting takes eect.

To specify the slideshow speed

(JPEG image les only)
1
Press DISPLAY during slideshow.
e Control Menu appears.
If “INTERVAL” is not displayed on
the Control Menu, press DISPLAY
repeatedly until “INTERVAL” appears.
2
Press or repeatedly to select
(INTERVAL), then press ENTER.
e options for “INTERVAL” appear.
3
Press or repeatedly to select the
desired transition interval.
e default setting is underlined.
NORMAL: Sets to the standard
duration.
FAST: Sets the duration shorter
than “NORMAL.”
SLOW 1: Sets the duration longer
than “NORMAL.”
SLOW 2: Sets the duration longer
than “SLOW 1.”
4
Press ENTER.
e selected setting takes eect.
Note
Some JPEG image les (especially progressive
JPEG image les or JPEG image les with
3,000,000 pixels or more) may take a longer
time to display than others, which may make
the transitions seem longer than that of the
option you selected.
Continued