Channel setting
Notes
•Be sure to set the arrow mark of the channel select switch to the clicked position of the desired channel number. If the switch does not click on the channel number, the desired channel may not be set on the unit.
•If the channel select switches are operated while the transmitter is on, the POWER/BATT indicator flashes in green as a warning.
•If you set to any channel other than those listed in “Wireless Channel Lists” on pages
•While the POWER/BATT indicator is flashing, the RF output signal send from the transmitter becomes lower than the usable level.
While POWER/BATT indicator on the transmitter is flashing, the RF input indicator on the tuner may light, if the transmitter locates near the tuner.
Though the RF input indicator lights on the tuner, the Sony tuner (equipped with muting function) makes neither noise nor audio output.
•Make sure that the channel selected is the same as that selected on the tuner used in the same system.
•If there is a TV broadcasting station near by, do not use the station's channel.
Microphone System
Operation
Microphone connection
Sony microphones
Attach a microphone | To dettach a |
to the unit directly or | microphone, |
use a microphone | press the |
cable with | microphone |
and | release |
connectors. | button. |
If noise is heard
Depending on the environment where the system is installed, outside noise or radio wave may disrupt the transmission of certain channels.
To select a channel under this circumstance, turn off the transmitter. Select a channel on the tuner, at which the RF indicator is off. (A channel free from noise or radio wave interference is selected.) Then, set the same channel on the transmitter.