71
If these solutions do not help improve the situation, consult your nearest Sony dealer.If you take the unit to be repaired because of disc playback trouble, bring the disc that was used at the time the problem began.
Local Seek +/Local Seek –
The local seek mode is on during au tomatic tuning.
No AF
There is no alternative frequency for the current
station.
No device found.
No device is in the list of registered Bluetooth device.
tPerform pairing with a Bluetooth device (page 36).
No playable da ta.
The disc does not contain playable data.
No SensMe™ data on device.
The connected USB device does not contain data for
the SensMe™ function, or the data has been moved to
an improper location on the USB device.
No TP
The unit will continue searching for available TP
stations.
Offset
There may be an internal malfunction.
tCheck the connection. If the error indication
remains on the display, consult your nearest Sony
dealer.
Output connection failure.
The connection of speakers/amplifiers is incorrect.
tSee the supplied “Installation/Connections” guide
to check the connection.
Overcurrent Caution on USB
The USB device is overloaded.
tDisconnect the USB device, then change the source
by pressing (SOURCE/OFF).
tIndicates that the USB device is out of order, or an
unsupported device is connected.
Playback prohibited by region code.
The DVD’s region code differs from the unit’s region
code.
Please push reset.
This unit or USB device cannot be operated due to a
problem.
tPress the reset button (page 16).
SensMe™ data Reading...
The unit is reading all data for the SensMe™ function
in the connected USB device.
tWait until reading is complete. Depending on the
amount of data, etc., it may take time.
The connected USB device is not supported.
For details on the compatibility of your USB device,
visit the support site.
The SensMe™ data is corrupted.
The data for the SensMe™ function has a problem,
such as altered file name, information, etc.
USB device is not connected.
USB is selected as source without a USB device
connected. A USB device or a USB cable has been
disconnected during playback.
tBe sure to connect a USB device and USB cable.
USB Reading...
The unit is reading all file/album (folder) information
in the connected USB device.
tWait until reading is complete and playback starts
automatically. Depending on the structure, it may
take time.
“” or “”
During reverse or fast-forward, you have reached the
beginning or the end of the disc and you cannot go any
further.
“”
The character cannot be displayed with the unit.