Manuals / Brands / Photography / Camcorder / Sony / Photography / Camcorder

Sony XCD-MV6 Location and Function of Parts and Operation

1 34

Download 34 pages, 753.62 Kb

Overview

Location and Function of Parts and Operation

Front/Top/Bottom

1Lens mount (C-mount)

Attach any C-mount lens or other optical

equipment.

Note

The lens must not project more than 10 mm (13/32 inch)

from the lens mount.

1 Lens mount face 210 mm (13/32 inch) or less

2Auxiliary holes (top)

3Reference holes (bottom)

These precision screw holes are for locking the

camera module. Locking the camera module into

these holes secures the optical axis alignment.

For details, see “Dimensions” on page 33.

Rear

4IEEE1394b connectors

Connect an IEEE1394b camera cable (not

supplied) to this connector.

58-pin I/O connector

When power from the IEEE1394b connector is

insufficient, power is supplied through this

connector.

Pin No. Signal Pin No. Signal

1TPB– 6VG

2TPB+ 7NC

3TPA– 8VP

4TPA+ 9TPBG

5TPAG

Pin No. Signal Pin No. Signal

1 Trigger IN 5 GPI1 IN

2 Strobe OUT 6 Power GND

3 GPO1 OUT 7 Power IN

4 GPI2 IN 8 GPO2 OUT

Contents

Main Table of Contents Overview Functions Control Specifications Main Features System Components Connection Diagram Location and Function of Parts and Operation Front/Top/Bottom Rear Installation Fitting the lens Connecting the camera cable When power supply from the IEEE1394b connector is insufficient Notes on Operation Power supply Foreign bodies Locations for operation and storage Care Strobe/GPIO Circuit Strobe Output / GPIO Circuit Functions Shutter Tri gg er Trigger Polarity Trigger Delay Tri gg er Mode Strobe Control GPIO Memory Channel User Free Memory Broadcast Command 1394 Bus Synchronization Gain Brightness Gamma Pan Image Buffer (Memory Shot) Parti al Sca n Pseudo-Binning Mode 16-bit Mode Image Correction Flipping images horizontally and vertically Control Camera Command Status Register Memory Map ConfigurationROM Page Control Base Address Inquiring about Supported Video Modes Video Mode Settings (S800/S1600) Starting/Stopping Video Transfer (ContinuousShot) OneShot, MultiShot and ImageBuffer Control of IIDC Standard Features The formula for absolute value shutter control register address Control of IIDC Optional Features Check if the camera is equipped with optional features by reading bit 3 of BASIC_FUNC_INQ. Check the supported feature by reading Opt_Function_Inq. PIO control Strobe control Control of Sonys Unique Features Displaying the Test Chart Displaying the gray scale Turning off the test chart User Free Memory Shading correction Generating shading correction data Enabling shading correction Disabling shading correction Flipping Images Horizontally and Vertically Enabling images to be flipped vertically Disabling vertical flipping of images Enabling images to be flipped horizontally Disabling horizontal flipping of images Notes on the Camera Operations If Frame Rate Decrease Occurs When Using Trigger Mode Increase in White Flecks and Noise Pseudo-binning mode sensitivity Shutter Speed and Image Quality Assurance Performance Assured Visual Output Power Consumption Specifications Specifications Video Modes Supported Fixed format Free format Appendix Appendix Spectral Sensitivity (Relative Response) Parameters XCD-MV6 Spectral sensitivity (relative response) parameters (without lens and light source parameters) Relative Response Wave Length [nm] Dimensions