Sony XCD-MV6 Strobe/GPIO Circuit

Overview

Strobe/GPIO Circuit

Strobe Output / GPIO Circuit

The Strobe output and GPIO circuit is configured as

follows. Be sure to take note of this before use.

Strobe output circuit

This is a strobe output circuit diagram.

This is a standard CMOS level output (5 V).

The camera is equipped with a protective resistor of

220 Ω. Be sure to confirm the output waveform before

use.

GPO1/2 output circuit

This is a GPO1/2 output circuit diagram.

This is a standard CMOS level output (5 V).

Equipped with a protective resistor of 2.2kΩ. Be su re t o

confirm the output waveform before use.

GPI1/2 input circuit

This is a GPI1/2 input circuit diagram.

Compatible with standard TTL level input.

Equipped with a protective resistor of 10kΩ. Be s ur e to

confirm the input waveform before use.

Strobe output

terminal

220Ω

GPO1/2

output circuit

2.2kΩ

GPI1/2 input

circuit

10kΩ

10pF

Contents

Main Table of Contents Overview Functions Control Specifications Main Features System Components Connection Diagram Location and Function of Parts and Operation Front/Top/Bottom Rear Installation Fitting the lens Connecting the camera cable When power supply from the IEEE1394b connector is insufficient Notes on Operation Power supply Foreign bodies Locations for operation and storage Care Strobe/GPIO Circuit Strobe Output / GPIO Circuit Functions Shutter Tri gg er Trigger Polarity Trigger Delay Tri gg er Mode Strobe Control GPIO Memory Channel User Free Memory Broadcast Command 1394 Bus Synchronization Gain Brightness Gamma Pan Image Buffer (Memory Shot) Parti al Sca n Pseudo-Binning Mode 16-bit Mode Image Correction Flipping images horizontally and vertically Control Camera Command Status Register Memory Map ConfigurationROM Page Control Base Address Inquiring about Supported Video Modes Video Mode Settings (S800/S1600) Starting/Stopping Video Transfer (ContinuousShot) OneShot, MultiShot and ImageBuffer Control of IIDC Standard Features The formula for absolute value shutter control register address Control of IIDC Optional Features Check if the camera is equipped with optional features by reading bit 3 of BASIC_FUNC_INQ. Check the supported feature by reading Opt_Function_Inq. PIO control Strobe control Control of Sonys Unique Features Displaying the Test Chart Displaying the gray scale Turning off the test chart User Free Memory Shading correction Generating shading correction data Enabling shading correction Disabling shading correction Flipping Images Horizontally and Vertically Enabling images to be flipped vertically Disabling vertical flipping of images Enabling images to be flipped horizontally Disabling horizontal flipping of images Notes on the Camera Operations If Frame Rate Decrease Occurs When Using Trigger Mode Increase in White Flecks and Noise Pseudo-binning mode sensitivity Shutter Speed and Image Quality Assurance Performance Assured Visual Output Power Consumption Specifications Specifications Video Modes Supported Fixed format Free format Appendix Appendix Spectral Sensitivity (Relative Response) Parameters XCD-MV6 Spectral sensitivity (relative response) parameters (without lens and light source parameters) Relative Response Wave Length [nm] Dimensions