16-bit Mode

The camera supports 16-bit Black & white (Monochrome) mode, but because the output of the AD converter is 14-bit, only the least significant 14 bits of the 16 bits will handle data. The upper 2 bits will be filled with zeros.

00dddd dddddddd

ExposureOut

When trigger is OFF, or software trigger is ON, a signal that indicates the exposure time is output from the TRIG IN/Exposure OUT connector of the camera.

+5 V

4.7 kΩ

exposure time

The LOW period that is given by an output wave form is an approximate guideline. It does not correspond exactly to the actual exposure time.

Functions

White Balance

(XCD-V50CR only)

You can adjust the R and B gain with respect to G. Shoot a white object and adjust the two gains to standardize the signal levels of R, G, and B.

Hue

(XCD-V50CR only)

You can adjust the G gain. Use this feature when you cannot obtain the correct white balance using the R and B gain.

The following Bayer patterns are available.

GB R G

XCD-V50CR

8

XCD-V50