Sony XEL-1 Using TV Features, Overview of the Remote Control and TV Controls/Indicators, Inserting Batteries into the Remote Control, Remote Control

Using TV Features

Overview of the Remote Control and TV Controls/Indicators

Inserting Batteries into the Remote Control

When using the remote control for the first time

Pull the insulation film out from the remote control.

When changing the battery

Unlock the battery holder by pushing a pen tip into the hole located on the rear of the remote control. Slide the battery holder out. Replace the battery with CR2032 (lithium) battery with e side up in the battery holder of the remote control.

Slide to open

Remote Control

1 2 3

•This remote control cannot be programmed to use with other equipment.

•The 5 button and CH + have a tactile dot. Use them as a reference when operating the remote control.

•This remote control is designed to operate at fairly close range from the TV. If you use with other Sony TVs, operate it near the TV you want to control.

Button Description

1DISPLAY Press once to display the information pertaining to the channel and/or program when available. The OSD (On Screen Display) will time out in a few seconds or press again to immediately turn off the display. You can also set the display to show minimal information. See Info Banner on page 41.

2 CC	Press to turn on and off the Closed Captions (CC). To change
	or customize the CC Display, see page 38.

3 DMex	Press to access features in the optional BRAVIA external
	module (e.g. DMX-NV1). See your dealer or
	www.sony.com/bravia for more information. The module may
	not be available in your region.

4SOUND Press to cycle through different sound settings: Dynamic for enhancing treble and bass, Standard for spoken dialog and Custom for flat setting (see page 34).

50-9 ENT Press 0-9to select a channel; the channel changes after two seconds. Press ENT to change channels immediately.

6Use with 0-9and ENT to select digital channels.

For example, to enter 2.1, press	2	,		,	1	and ENT.