Recording on a cassette tape
Tape Recording
Before recording:
When recording important selections, make a preliminary test to ensure that the desired material is properly recorded.
SHARP is not liable for damage or loss of your recording arising from malfunction of this unit.
The volume and sound controls can be adjusted with no effect or the recorded signal (Variable Sound Monitor).
For recording, use only normal tapes. Do not use metal or CrO2 tapes.
Erase - prevention tab of cassette tapes:
When recording on a cassette tape, make sure that the erase- prevention tabs are not removed. Cassette have removable tabs that prevent accidental recording or erasing.
To protect the recorded sound, remove the tab after recording. Cover the tab hole with adhesive tape to record on the tape with- out the tab.
Side A
Recording from CD or MP3/WMA disc
1Press the
2Load a blank cassette.
3Select "CD" function.
4Load the disc to be recorded.
Select the track number if required.
For programmed recording, programme the material in ad- vance (as described under "Programmed Play").
5Press the RECORD 
button. The PLAY 
button is en- gaged simultaneously and CD recording starts.
When you want to record music as you listen, press the RECORD 
button. Recording starts automatically from the be- ginning of the track.
6Press the STOP/EJECT 
/ 
button to stop recording. When the end of the tape is reached, the CD player and deck stop automatically.
Tab for side B Tab for side A
24
