XL-MP2H

Precautions

General Information

4

General

Please ensure that the equipment is positioned in a well ventilated area and that there is at least 10 cm (4") of free space along the sides and back. There must also be a minimum of 10 cm (4") of free space on the top of the unit.

10 cm (4")

10 cm (4")

 

10 cm (4")

 

10 cm (4")

Use the unit on a firm, level surface free from vibration.

Keep the unit away from direct sunlight, strong magnetic fields, excessive dust, humidity and electronic/electrical equipment (home computers, facsimiles, etc.) which generate electrical noise.

Do not place anything on top of the unit.

Do not expose the unit to moisture, to temperatures higher than 60˚C (140˚F) or to extremely low temperatures.

If your system does not work properly, disconnect the AC power lead from the wall socket. Plug the AC power lead back in, and then turn on your system.

In case of an electrical storm, unplug the unit for safety.

Hold the AC power plug by the head when removing it from the wall socket, as pulling the lead can damage internal wires.

The AC power plug is used as disconnect device and shall always remain readily operable.

Do not remove the outer cover, as this may result in electric shock. Refer internal service to your local SHARP service fa- cility.

The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, tablecloths, curtains, etc.

No naked flame sources, such as lighted candles, should be placed on the apparatus.

Attention should be drawn to the environmental aspects of battery disposal.

The apparatus is designed for use in moderate climate.

This unit should only be used within the range of 5˚C - 35˚C (41˚F - 95˚F).

Warnings:

The voltage used must be the same as that specified on this unit. Using this product with a higher voltage other than that which is specified is dangerous and may result in a fire or other type of ac- cident causing damage. SHARP will not be held responsible for any damage resulting from use of this unit with a voltage other than that which is specified.

CD players use a laser pickup which can damage the eyes if viewed directly. Do not look at the pickup, and do not touch the pickup directly.

Volume control

The sound level at a given volume setting depends on speaker effi- ciency, location, and various other factors. It is advisable to avoid ex- posure to high volume levels. Do not turn the volume on to full at switch on and listen to music at moderate levels.

Care of compact discs

Compact discs are fairly resistant to damage, however mistracking can occur due to an accumulation of dirt on the disc surface. Follow the guidelines below for maximum enjoyment from your CD collec- tion and player.

Do not write on either side of the disc, particularly the non-label side from which signals are read. Do not mark this surface. Keep your discs away from direct sunlight, heat, and excessive moisture.

Always hold the CDs by the edges. Fingerprints, dirt, or water on the CDs can cause noise or mistracking. If a CD is dirty or does not play properly, clean it with a soft, dry cloth, wiping straight out from the centre, along the radius.

NO

YES

 

Correct

Page 4
Image 4
Sony XL-MP2H operation manual Precautions, General, Volume control, Care of compact discs