Additional

Other Functions

 

Information

 

 

 

 

 

 

 

 

 

Adjusting the sound characteristics

1 Select the item you want to adjust by pressing (SEL) repeatedly.

VOL (volume) nBAS (bass) n

TRE (treble) nBAL (left-right) n

FAD (front-rear)

2 Adjust the selected item by pressing either (Ð) or (+).

Adjust within three seconds after selecting. EN (After three seconds the button will again

serve as volume control button.)

Enjoying bass and treble at low volume

— Loudness functionPress (PTY/LOUD) for more than two seconds. n“LOUD” will appear on the display.

Bass and treble will be boosted.

To cancel, press again.

Muting the beep tone

Press (6) while pressing (SEL).

To reactivate the beep tone, press these buttons once more.

Precautions

•If your car was parked in direct sunlight resulting in a considerable rise in temperature inside the car, allow the unit to cool off before operating it.

•If no power is being supplied to the unit, check the connections first. If everything is in order, check the fuse.

•If no sound comes from the speakers of a 2-speaker system, set the fader control to the centre position.

•When the tape is played back for a long period, the cassette may become warm because of the built-in power amplifier.

However, this is not a sign of malfunction.

If you have any questions or problems concerning your unit that are not covered in this manual, please consult your nearest Sony dealer.

To maintain high quality sound

If you have drink holders near your audio equipment, be careful not to splash juice or other soft drinks onto the car audio. Sugary residues on this unit or cassette tapes may contaminate the playback heads, reduce the sound quality, or prevent sound reproduction altogether.

Cassette cleaning kits cannot remove sugar from the tape heads.

14