Getting Started

Resetting the unit

Before operating the unit for the first time or after replacing the car battery, you must reset the unit.

Press the reset button with a pointed object, such as a ballpoint pen.

Reset button

Note

Pressing the reset button will erase all the memorized programme and memory functions.

Detaching the front panel

The front panel of this unit can be detached in order to prevent the unit from being stolen.

1 Press (OFF).

2 Press (RELEASE) to open up the front panel. Then slide the front panel a little to the left, and pull it off towards you.

(RELEASE)

Be sure not to drop the panel after detaching it from the unit.

Attaching the Front Panel

Apply the right side of the front panel to the unit by attaching part A of the front panel to part B of the unit as illustrated, then swing the left side into the unit until it clicks.

B A

Notes

•Make sure that the front panel is the right way up when attaching it to the unit as it cannot be attached upside down.

•Do not press the front panel hard against the unit when attaching it to the unit. It can easily

be attached by pressing it lightly against the

EN

unit.

• Do not press hard or give excessive pressure to

Getting

the power off. However, if you press (RELEASE)

the display windows of the front panel.

 

• Before removing the front panel, be sure to turn

 

to detach the panel while the unit is still turned

Started

on, the power will be automatically turned off in

 

order to protect the speakers from being

 

damaged.

 

• Do not expose the front panel to direct sunlight,

 

heat sources such as hot air ducts or leave it in a

 

humid place. Never leave it on the dashboard

 

etc. of a car parked in direct sunlight where

 

there may be a considerable rise in temperature

 

inside the car.

 

Caution alarm

If you turn the ignition key to the OFF position without removing the front panel, the caution alarm will be activated and a beep tone will be heard for a few seconds.

5