Sony XR-C5080R Adjusting the sound characteristics, Other Functions, Attenuating the sound, Changing the sound and beep tone, Press (ATT), Adjusting the bass curve

Other Functions

Adjusting the sound characteristics

1 Select the item you want to adjust by pressing (SEL) repeatedly.

VOL (volume) nBAS (bass) nTRE (treble)

nBAL (left-right) nFAD (front-rear)

2 Adjust the selected item by pressing either (+) or (–).

Adjust within three seconds after selecting. (After three seconds the button will again serve as the volume control button.)

EN

Attenuating the soundPress (ATT).

The “ATT” indication flashes.

To restore the previous volume level, press again.

Changing the sound and beep toneBoosting the bass sound — D-bass

You can enjoy clear and powerful bass sound. The D-bass function boosts the low frequency signal with a sharper curve than conventional bass boost.

You can hear the bass line more clearly even if the vocal volume remains the same. You can emphasize and adjust the bass sound easily with the D-BASS control. This effect is similar to the one you get when you use an optional subwoofer system.

Moreover, the Digital D-bass*function creates even sharper and more powerful bass sounds than Analog D-bass.

	Digital D-bass		Analog D-bass
Level	D-BASS 3	Level	D-BASS 3
	D-BASS 2		D-BASS 2
	D-BASS 1		D-BASS 1
0dB		0dB
	Frequency (Hz)		Frequency (Hz)

Adjusting the bass curveTurn the D-BASS control to adjust the bass level (1, 2 or 3).

“D-BASS”*appears in the display.

To cancel, turn the control to the OFF position.

*If the CD changer has the digital D-bass function, “DIGITAL D-BASS” appears on the display during CD playback.

Note

If the bass sound becomes distorted, adjust the D-BASS control or volume button.

Attenuating the beep tonePress (6) while pressing (SEL).

To obtain the beep tone again, press these buttons again.

Note

If you connect an optional power amplifier to the LINE OUT and do not use the built-in amplifier, the beep tone will be disabled.

12