EN

Playing tracks in randomorder — Shuffle playTo play the tracks on the current disc in random order

Press (3) repeatedly during CD/MD playback until “SHUF 1” is displayed.

To play all the discs in the unit in random order

Press (3) repeatedly during CD/MD playback until “SHUF 2” is displayed.

To play all the discs in the current connected CD / MD units in random order

Press (3) repeatedly during CD/MD playback until “SHUF 3” is displayed.

Each time you press (3) the display changes as follows:

SHUF 1

 

 

 

SHUF 2

(Disc shuffle)

 

 

(Unit shuffle)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Cancel (Normal

 

 

SHUF 3*

 

 

disc playback mode)

 

 

(All shuffle)

*“SHUF 3” only when two or more CD/MD units are connected the unit.

Note

CD/MD units are operated separately.

If you press (1) during shuffle play, the first 10 seconds of all tracks will be played in random order.

AdditionalInformationPrecautions

•If your car was parked in direct sunlight resulting in a considerable rise in temperature inside the car, allow the unit to cool off before operating it.

•If no power is being supplied to the unit, check the connections first. If everything is in order, check the fuse.

•If no sound comes from the speakers of a 2-speaker system, set the fader control to the center position.

•When the tape is played back for a long period, the cassette may become warm because of the built-in power amplifier.

However, this is not a sign of malfunction.

If you have any questions or problems concerning your unit that are not covered in this manual, please consult your nearest Sony dealer.

To maintain high quality sound

If you have drink holders near your audio equipment, be careful not to splash juice or other soft drinks onto the car audio. Sugary residues on this unit or cassette tapes may contaminate the playback heads, reduce the sound quality, or prevent sound reproduction altogether.

Cassette cleaning kits cannot remove sugar from the tape heads.

14