Locating the beginning of a track— Automatic Music Sensor (AMS)

You can skip up to nine tracks at one time.

During playback, press either side of (SEEK/AMS) momentarily.

 

 

 

SEEK

 

 

 

 

 

 

 

 

AMS

 

To locate the

 

To locate the

preceding tracks

 

succeeding tracks

Note

The AMS function may not work when:

•the blanks between tracks are shorter than 4 seconds

•there is noise between tracks

•there are long sections of low volume or quiet sections.

Changing the displayed items

Each time you press (DSPL) momentarily during tape playback, the displayed item changes as follows:

z Tape playback zClock zFrequency*

EN

* While the ATA function activated.

 

Playing a tape in various modesSearching for the desired track—Intro scanPress (1) during playback.

“INTRO” appears on the display.

The first 10 seconds of all the tracks are played.

When you find the desired track, press again. The unit returns to the normal playback mode.

Playing tracks repeatedly—Repeat playPress (2) during playback.

“REP” appears on the display.

When the current played track is over, it will be played again from the beginning.

To cancel this function, press (2) again.

Switching to the radio while fast- winding a tape—Automatic Tuner Activation (ATA)Press (5) during playback.

“ATA” appears on the display.

While fast-forwarding or rewinding, press (SEEK/AMS), after two seconds the tuner automatically turns on.

To cancel this function, press (5) again.

Skipping blanks during tapeplayback — Blank skipPress (6) during playback.

“BL SKIP” appears on the display.

Blanks longer than eight seconds will automatically be skipped during tape playback.

To cancel this function, press (6) again.

6