Other Functions

Adjusting the sound characteristics

You can adjust the bass, treble, balance, and fader.

You can store the bass and treble levels independently for each source.

1 Select the item you want to adjust by pressing (SEL) repeatedly.

Each time you press (SEL), the item changes as follows:

BAS (bass) tTRE (treble) t

BAL (left-right) tFAD (front-rear)

2 Adjust the selected item by pressing

either side of the volume button. Adjust within three seconds after selecting the item.

Attenuating the sound

Press (ATT).

After “ATT-ON” momentarily flashes, the “ATT” indication appears in the display.

To restore the previous volume level, press (ATT) again.

“ATT-OFF” flashes momentarily.

Changing the sound and display settings

The following items can be set: •A.SCRL (Auto Scroll)* (page 12). •M.DSPL (Motion Display)

–the demonstration mode which appears when the tape is ejected and no source is selected (e.g., tuner is turned off).

•BEEP – to turn the beep sound on or off.

1 Press (SEL).
2 Press the preset number button to select the desired item.
Number buttons
(3): A.SCRL*
(4): M.DSPL
(6): BEEP

*When no CD or MD is playing, this item will not appear.

3 Press the preset number button repeatedly to select the desired setting (Example: ON or OFF).

10