Memorizing only the desired stations

You can preset up to 18 FM stations (6 each for FM1, 2, and 3) and up to 12 AM stations (6 each for AM1 and 2) in the order of your choice.

1 Press (SOURCE) repeatedly to select the tuner.

In case of tape playback, press Z to eject the tape.

2 Press (MODE) repeatedly to select the band.

3 Press either side of (SEEK/AMS) to tune in the station that you want to store on the number button.

4 Press the desired number button ((1) to

(6)) until “MEM” appears.

The number button indication appears in the display.

Note

If you try to store another station on the same number button, the previously stored station will be erased.

Receiving the memorized stations

1 Press (SOURCE) repeatedly to select the tuner.

In case of tape playback, press Z to eject the tape.

2 Press (MODE) repeatedly to select the band.

3 Press the number button ((1) to (6)) on which the desired station is stored.

If you cannot tune in a preset station

— Automatic tuning/ Local Seek Mode

Automatic tuning:

Press either side of (SEEK/AMS) to search for the station.

Scanning stops when the unit receives a station. Press either side of (SEEK/AMS) repeatedly until the desired station is received.

Local Seek Mode:

If the automatic tuning stops too frequently, press (SENS) repeatedly until “LOCAL-ON” appears.

“LCL” indicator is displayed.

Only the stations with relatively strong signals will be tuned in.

Tip

If you know the frequency of the station you want to listen to, press either side of (SEEK/AMS) until the desired frequency appears (manual tuning).

If FM stereo reception is poor

Monaural Mode

During radio reception, press (SENS) repeatedly until “MONO-ON” appears.

“MONO” indicator is displayed.

The sound improves, but becomes monaural (“ST” disappears).

To return to normal mode, select “MONO- OFF.”

9