Specifications
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION
22 watts per channel minimum continuous average power into 4 ohms, 4 channels driven from 20 Hz to 20 kHz with no more than 5 % total harmonic distortion.
Other specifications
Cassette player section
Tape track | |
Wow and flutter | 0.13 % (WRMS) |
Frequency response | 30 – 15,000 Hz |
55 dB |
Tuner section
FM
Tuning range | FM tuning interval: |
| 87.5 – 107.9 MHz |
| (at 200 kHz step) |
Antenna terminal | External antenna connector |
Intermediate frequency | 10.7 MHz |
Usable sensitivity | 11 dBf |
Selectivity | 75 dB at 400 kHz |
62 dB (stereo), | |
| 68 dB (mono) |
Harmonic distortion at 1 kHz | |
| 0.7 % (stereo), |
| 0.5 % (mono) |
Separation | 33 dB at 1 kHz |
Frequency response | 30 – 15,000 Hz |
AM
Tuning range | AM tuning interval: |
| 530 – 1,710 kHz |
| (at 10 kHz step) |
Antenna terminal | External antenna connector |
Intermediate frequency | 10.7 MHz/450 kHz |
Sensitivity | 30 µV |
Power amplifier section
Outputs | Speaker outputs |
| (sure seal connectors) |
Speaker impedance | 4 – 8 ohms |
Maximum power output | 45 W ⋅ 4 (at 4 ohms) |
General
Outputs | Audio output |
|
|
| Power antenna relay | ||
| control lead |
|
|
| Power amplifier control | ||
| lead |
|
|
Tone controls | Bass ±10 dB at 20 Hz | ||
| Treble ±10 dB at 20 kHz | ||
Power requirements | 12 V DC car battery | ||
| (negative ground) |
| |
Dimensions | Approx. 178 ⋅ | 50 ⋅ | 178 mm |
| (7 1/8 ⋅ 2 ⋅ 7 1/8 in.) |
| |
| (w/h/d) |
|
|
Mounting dimensions | Approx. 182 ⋅ | 53 ⋅ | 161 mm |
| (7 1/4 ⋅ 2 1/8 ⋅ | 6 3/8 in.) | |
| (w/h/d) |
|
|
Mass | Approx. 1.2 kg (2 lb 10 oz.) | ||
Supplied accessories | Parts for installation and | ||
| connections (1 set) |
| |
| Front panel case (1) | ||
Optional accessories | BUS cable (supplied with | ||
| an RCA pin cord) |
| |
| |||
Optional equipment | CD changer (10 discs) | ||
|
|
| |
CD changer (6 discs)
MD changer (6 discs)
Source selector
Design and specifications are subject to change without notice.
16