Note

After changing the settings, you need to close the Main Page by pressing (EXIT) repeatedly to make the settings effective.

Setting the Install Lock

You can protect your installed data and information using the Install Lock.

1Press (MENU).

The Main Page appears.

2Press M or m repeatedly to select “User Installation”, then press

(ENTER).

3Press M or m repeatedly to select “Parental Lock”, then press

(ENTER).

4Enter the current password.

5Press M or m repeatedly to select “Install Lock”.

6Press < or , repeatedly to select “ON”.

To cancel the Install Lock, select “OFF”.

7Press (EXIT) repeatedly to close the Main Page.

Note

After changing the settings, you need to close the Main Page by pressing (EXIT) repeatedly to make the settings effective.

If you forget the password

While the Main Page is displayed, press 4, 7, 8, 9 and 3. The Factory Default window appears. Then select “OK” and press (ENTER). The setting of the unit will be set back to the factory default. To cancel, select “CANCEL”.

Note

If the unit is set back to the factory default, all the settings will be lost. Make the settings again.

21