Connection
Connection example
XM Antenna* |
| Sony BUS Compatible |
| Car Audio* | |
|
| |
|
|
|
CD/MD changer*
* not supplied
Cautions
•This unit is designed for negative ground 12 V DC operation only.
•Before making connections, turn the car ignition off to avoid short circuits.
•Connect the yellow power input cord only after all other cords have been connected.
•Run all ground leads to a common ground point.
Connection diagram
Connect with a BUS cable to the XM Satellite receiver, aligning the v marks.
Note
When you use an optional BUS cable, note that a BUS cable with an
| SONY BUS CONTROL |
|
| AUDIO |
| ANTENNA | ||
POWER | OUT | IN | L OUT R | L IN R | TER | SAT |
GreenYellow
2
XM antenna
Connect with the connector(not supplied) hook facing down.
To a +12 V power terminal which | Fuse (3 A) |
is energized at all times |
|
Be sure to connect the black ground lead to it first.
To a metal point on the car
First connect the black ground lead, then connect the yellow power input leads.
Note
Locate the power cord and the RCA pin cord as far away as possible.
RCA pin cord (not supplied)
Yellow
BUS cable (not supplied)
4
Black
3
OUT
CD/MD changer
(not supplied)
OUT
IN
Sony BUS Compatible
Car Audio
(not supplied)
IN