Cautions
•This unit is designed for negative ground 12 V DC operation only.
•Before making connections, turn the car ignition off to avoid short circuits.
•Connect the yellow power input cord only after all other cords have been connected.
•Run all ground leads to a common ground point.
CONTROL |
|
|
| AUDIO |
|
| ANTENNA | ||||||
|
|
|
|
|
|
| |||||||
IN | L OUT R | L IN R | TER | SAT | |||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
GreenYellow
XM antenna (not supplied)
RCA pin cord |
|
| OUT | |||
(not supplied) |
|
| ||||
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CD/MD changer
(not supplied)
BUS cable |
|
|
|
|
|
| OUT |
(not supplied) |
|
|
|
|
|
| IN |
| 4 |
|
|
|
| ||
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Sony BUS Compatible
Car Audio
(not supplied)
3 IN
Additional Information
Troubleshooting
Should any problem persist after you have made the following checks, consult your nearest Sony dealer. Consult XM if you have any questions or problems concerning the broadcast service of the XM Satellite radio.
The information on the display cannot be changed during XM Satellite Radio reception. •Refer to “Caution” in “Getting Started.”
No sound.
•Adjust the volume control of the master unit. •Cancel the attenuate function on the master unit. •The connecting cords are not connected properly.
The sound is impaired by noise.
Locate cords and cables such as an antenna cord, a BUS cable, an RCA pin cord, or a power cord so as they do not interfere with each other.
The channels cannot be received.
Check the connections of the receiver and the antenna.
Advisory Messages (for users of Basic Operations A)
When a problem occurs with the receiver, an error message will be displayed on the master unit.
CHECK ANTENNA
The antenna is not connected properly.
tCheck the connections of the receiver and the antenna.
UPDATING
You have not subscribed to XM, or the channel is not authorized.
tYou need to subscribe to XM.
NO SIGNAL
XM signal is too weak.
tMove to another area where your system can receive the signal.
OFF AIR
The channel is not broadcasting now.
tSelect another channel.
LOADING
The receiver is reading the channel information.
tWait until the receiver completes receiving the information.
“– – – – – – – – ”
Depending on the station, Artist Name/Program Name, Song Title and Category Name does not transmit. In this case, “– – – – – – – – ” is displayed. This is not an error.
“CH – –
The channel to be
Advisory Messages (for users of Basic Operations B)
When a problem occurs with the receiver, an error message will be displayed on the master unit.
ANTENNA
The antenna is not connected properly.
tCheck the connections of the receiver and the antenna.
UPDATING
You have not subscribed to XM, or the channel is not authorized.
tYou need to subscribe to XM.
NO SIGNL
XM signal is too weak.
tMove to another area where your system can receive the signal.
OFF AIR
The channel is not broadcasting now.
tSelect another channel.
LOADING
The receiver is reading the channel information.
tWait until the receiver completes receiving the information.
“– – – – ”
Depending on the station, Artist Name/Program Name, Song Title and Category Name does not transmit. In this case, “– – – – ” is displayed. This is not an error.
“CH – –
The channel to be
*Depending on the master unit, either “CH – –