Note

When “--” is displayed as the tape length, the total recording time of the programed tracks exceeds 98 minutes. Start from step 1 again.

Tips

•If you made a mistake, press CANCEL. The track programed last will be cleared. Re- program it.

•To check the order of tracks, press

PROGRAM•AUTO PRESET•CHECK in stop mode until “CHECK” appears in the display. Press =or +to display the track number in the programmed order.

•To check the total recording time on the front side and the reverse side:

Press DISPLAY ENTER MEMORY before starting recording. Each time you press the button, the display changes as follows: “total

recording time on the front side” n“total

recording time on the reverse side” n“total track number and the tape length you need to record the whole CD.

3 Press =or +to select the track you want to program, and press DISPLAY ENTER MEMORY.

The total number of programed tracks and the minimum tape length (unit: 2 minutes, up to 98 minutes) you need to record the programed tracks appear in the display.

4 Repeat step 3.

5 To change the recording time, press DISPLAY ENTER MEMORY.

If you do not change the recording time, skip to step 7.

Tape length flashes.

6 Press =or +to change the recording time and press DISPLAY ENTER MEMORY.

7 Insert a blank tape into the tape compartment.

8 Press r/Pand then (.

Recording will start on the front side automatically. The tracks are recorded in the programed order.

Player Tape The

The Tape Player 25