Timer-recording
radio programs | TIMER STANDBY | DISPLAY ENTER |
| MEMORY | |
You can set timer to record the radio at a |
|
|
certain time. You can also record the |
|
|
sound of the component connected to |
|
|
the LINE IN jack, using the timer. Make |
|
|
sure you have set the clock (see “Setting |
| =, + |
the clock” on page 28). |
| |
|
| DIR MODE |
Note
You cannot preset recording timer and waking up timer (page 29) at the same time.
Tips
•We recommend that you use AC power as the power source for optimum recording quality.
•When you receive the AM program in step 1, press r/Pto check if the noise is heard. If so, press MODE•MONO/ ST ISS to select the position that most decreases the noise.
Before you begin, make sure the t(clock) indication is not lit in the display. If it is lit, press STANDBY.
1 Tune in the radio station and insert a blank tape into the tape compartment with the side you want to record on facing forward.
2 Press DIR MODE to |
|
|
| display | |
select recording |
| |
|
| |
direction of the tape. One side |
| |
| Both sides |
|
|
|
|
3 Press TIMER to display the tindication.
Do the following operations by checking the display window.
4 Press =or +to display “RAdIO” “REC,” and press DISPLAY ENTER MEMORY.
32The Timer